Please click here for online technical assistance.
Online Help Hours:
Mon - Fri
8 AM - 4 PM MST
Live 24x7 Phone and E-mail Support
+49 6102 508270
Live 24x7 Phone and E-mail Support
Mon - Fri Phone and E-mail Support
9 AM - 5 PM ET
Europe - China
+49 6102 508270
9 AM - 5 PM CET
Live 24x7 Phone and E-mail Support
+44 1293 842451
FliteStar is a PC-based flight planner that allows you to perform flight planning on your desktop or laptop, with the ability to use the Internet to download weather and file flight plans. FliteStar has three versions - VFR, IFR and Corporate.
For help installing FliteStar, please refer to any of these sources:
For help using FliteStar, please refer to any of these sources:
*Pop-ups must be enabled in the web browser in order to view Flash screencasts.
*Closed captioning is available with the navigation bar 'CC' button at the bottom of each screencast.
To download a recent patch version of FliteStar, click the appropriate link below:
You should download this patch if you have any version from 9.502 through 9.610. To find your version of FliteStar, select Help > About at the top. This patch only works for versions 9.502 through 9.610. Users with previous versions should contact Jeppesen Sales Support about getting a program update. This patch updates FliteStar in accordance with the ICAO 2012 filing changes, and also contains all of the changes made in previous patches.
FliteStar 9.620 Patch (65.3 MB)
2012 Political Boundaries Update
Please close FliteStar and any other Jeppesen applications, then download and run the following file to update the political boundaries. This will also update the political boundaries for other Jeppesen applications that are installed on your computer.
2012VPLBoundaryUpdate.exe (29.7 MB)
Please follow these steps if weather is not showing up on the enroute chart and this message appears when clicking Weather > Live Weather Options...
After the file has been downloaded, run it to update the Jeppesen Weather Service to v184.108.40.206
Please ensure that any firewall or Internet security applications are either configured to allow FliteStar access to the Internet, or are disabled. FliteStar utilizes Internet ports 80 and 24901 to download the text weather and images from the Jeppesen Weather server. It may be necessary to configure your firewall or Internet security applications so these ports are not blocked. If your network has a router, gateway, or other networking device that also functions as a firewall, it may be necessary to configure the firewall so that Internet ports 80 and 24901 are not blocked.
Please ensure that any firewall or Internet security applications are either configured to allow FliteStar access to the Internet, or are disabled. FliteStar uses Internet port 8096 to connect to DTC DUAT, and port 23 to connect to CSC DUATS. It may be necessary to configure your firewall or Internet security applications so these ports are not blocked. If your network has a router, gateway, or other networking device that also functions as a firewall, it may be necessary to configure the firewall so that Internet ports 8096 and 23 are not blocked.
The GPS may not be properly configured for data transfer, or may not be using the latest Garmin firmware. First, please make sure the GPS is configured properly to accept data transfer, and that it is has been loaded with the latest Garmin firmware.
If you are still encountering this issue, there may be a corrupt flight plan in the GPS. This may be fixed by deleting all saved flight plans and waypoints from the GPS. If you do not want to lose the flight plans or waypoints saved in your GPS, please check the Garmin manual or contact Garmin support for additional options.
This error may occur in FliteMap if you load a route into the application, then select Connections - External Device Setup to setup your GPS.
Before selecting External Device Setup, unload all routes from the program by selecting File - Unload at the top of the application. If you have more than one route loaded, select File - Unload RoutePack - Unload All. Once all routes have been unloaded from the application, you can then select Connections - External Device Setup to setup your GPS in FliteMap.
It is only necessary to setup your GPS in External Device Setup once. In the future, when you'd like to enable the GPS moving map feature, select the GPS button on the left side of the screen, or select Connections - Connect to GPS. If you ever need to change the configuration of your GPS in FliteMap, make sure no routes are loaded before selecting External Device Setup.
Please note that FliteMap has been discontinued and is no longer sold or supported. If you are interested in a moving map program that enhances situational awareness, please take a look at our JeppView/FliteDeck software.
FliteStar lists (RoutePack List, Airport List, etc.) are missing, or some columns within the lists are missing.
First, select View - Reset List Windows at the top of the program. If this does not resolve the issue, please close FliteStar, browse to the location where FliteStar is installed (i.e. C:\Jeppesen\FliteStar), and delete the FliteStar.SSF file. Then, reopen FliteStar and make sure the lists appear correctly.
If "connecting to 0.0.0.0:1984" is displayed when updating online, FliteStar is unable to connect to the Jeppesen update servers. This can occur if there is no Internet connection or if another application is preventing FliteStar from accessing the Internet.
First, please open Internet Explorer and visit a page aside from your home page. This will ensure you have a valid connection. Next, please make sure any Internet security or firewall applications are either configured to allow FliteStar access to the Internet, or are disabled. FliteStar utilizes Internet ports 80 and 1984 to download the updates. It may be necessary to configure your firewall or Internet security applications so these ports are not blocked. If your network has a router, gateway, or other networking device that also functions as a firewall, it may be necessary to configure the firewall so that Internet ports 80 and 1984 are not blocked.
You can use the Jeppesen System Diagnostic Tool to test the connections to the Jeppesen update servers, as well as ports 80 and 1984. Please click on the Jeppesen System Diagnostic Tool link below to download and install it. Once you have opened the program, select FliteStar to test the connection.
Related documentsJeppesen System Diagnostics Tool
The Jeppesen Update Agent is failing, and red exclamation marks appear next to "Performing Speed Test" and "Checking for Updates".
This can occur if another application on your computer is preventing the Jeppesen Update Agent from downloading the updates. It is usually caused by the NOD32 Antivirus software. If you have the NOD32 software installed on your computer, you may need to configure it to exclude the Jeppesen Update Agent from being monitored. Please see the document below for instructions on how to add exclusions to NOD32
Related documentsAdding Exclusions to NOD32
Right-click on the profile view and make sure “Show Winds” and “Show Clouds” are checked.
If this does not resolve the issue, it may be caused by the Jeppesen Weather Service (JWC) running. To restore the FliteStar weather display:
1. Go to Start > Run, type in "control panel" and click OK.
2. When the Control Panel dialog opens, double-click Administrative Tools, and then Services.
3. In the Services dialog, locate the Jeppesen Weather Controller Service and right click on the name.
4. In the dialog that appears, select Properties.
5. In the Properties dialog General tab change "Startup type" to Manual and click OK.
6. Reboot your computer. Weather information from the text briefings should now appear in the Profile view.
If you are still experiencing difficulties, it may be due to an old or past date for a routepack. Try creating a new routepack with a current date for departure and then download a new weather briefing (ensuring the time and date of departure are correct). The winds aloft will now display in the profile view and navlog.
Close the application, browse to the directory where FliteStar is installed, open the Themes folder, delete the bars.dat file and reopen the application. This will remove any toolbars you have created, but the program will now save any new changes correctly.
Go to Edit > Default Aircraft and select the Weight & Balance tab. Make sure the envelope on the right side has been created and is complete.
Ensure the operating system being used is supported. Supported operating systems include English versions of Windows XP, Vista and Windows 7. This issue is common when using other language operating systems - changing the language preferences to English on a non-English version of Windows will not resolve the issue.
First, ensure user has full administrator rights. If so and the operating system being used is Windows Vista, close FliteStar, right-click on the FliteStar icon on the desktop and select “Run as administrator.” Follow the prompts to activate FliteStar again. This is a temporary fix - you will need to contact Customer Service at 1-800-621-5377 to order a new set of Windows Vista compatible FliteStar Program and Enroute Chart Data CDs. Once these are received, uninstall FliteStar and reinstall with the new CDs.
Resolution 1: Look at the CD/DVD and clean it, check for scratches, and use compressed air to clean out the CD/DVD drive.
Resolution 2: Try installing the disk on another computer (preferably a different model). If the problem persists, then the disk is defective and must be replaced.
Resolution 3: Update the CD/DVD drive firmware. Search the computer manufacturer’s website for the Technical Support/Downloads/etc. section and search for “DVD, CD-ROM, firmware update” or similar search using the specific computer model number. Install the updated firmware, reboot the computer and run the disk again.
Resolution 4: Perform all Windows Updates available for the computer. Go to www.windowsupdate.com and download ALL available updates – both optional and required. Reboot the computer, go back to www.windowsupdate.com and install any newly available updates. Reboot the computer and run the disk again.
Resolution 5: If the problem persists, contact Customer Service at 1-800-621-5377 for a replacement disk.
1. Close FliteStar.
2. Navigate to the directory where the software is installed (i.e. C:\Jeppesen\FliteStar).
3. Run the Deactivate.exe file.
4. Deactivate the program using one of the three available methods (internet, website, or over the phone).
5. Open FliteStar again.
6. Enter the software serial number when prompted.
7. Follow the prompts to activate the software. Disregard any error messages pertaining to “magnetic variation table”, etc.
8. Re-run FliteStar Enroute Chart Data CD. The serial number has now been changed and the appropriate navigation information installed.
FliteStar is compatible with the following operating systems:
* FliteStar is not supported on non-English versions of Microsoft Windows
|Device||Desktop, Notebook or Tablet PC||Desktop, Notebook, or Tablet PC|
|Processor||Pentium 4 or equivalent, 2.5 GHz or faster processor (32- or 64-bit)||Dual or more core, 3.8 GHz or faster processor (32- or 64-bit)|
|Memory||1 GB RAM or higher||2 GB RAM or higher|
|Display||VGA 1024x768, 24-bit color display||VGA 1280x1024, 24-bit color display or higher|
|Graphics Processor||32 MB video card||64 MB video card|
|Free Hard Drive Space*|
(U.S. - 48 States coverage)
|500 MB||1.2 GB|
|Free Hard Drive Space*|
|300 MB||1.4 GB|
|Free Hard Drive Space*|
|2 GB||4 GB|
|CD-ROM||8x Speed||24x Speed|
|Input Device||Pointer device, keyboard||Pointer device, keyboard|
|Internet access for Program, Weather, and Enroute Data Downloads. (Optional)||56k Dial-up Modem||Broadband Internet Connection (Cable, DSL, T1, etc.)|
|Printer (optional)||300dpi||600dpi, 6 pages per minute, color|
* Hard disk space requirements vary depending on coverage area and data installed. The figures listed above are estimates, as the data changes on a regular basis.
At this time, FliteStar must be installed using CDs. However, once the program has been installed, you can download updates over the Internet.
The standard license agreement allows for two simultaneous installations per serial number. You can uninstall and move the program to a new computer at your convenience.
First, make sure to backup any aircraft you have created or customized, as well as any RoutePacks you would like to keep. These files are stored in different locations depending on your operating system and where you chose to install FliteStar during the initial installation. To find out where the aircraft and RoutePack files are stored on your computer, open FliteStar and select Help - Installation, Setup, and Updates - Microsoft Windows Vista Folders. Before uninstalling FliteStar, we suggest you copy the files to another location, such as your My Documents folder.
Next, uninstall FliteStar by going to Windows Control Panel. During the uninstall process, it will ask if you would like to deactivate this copy of the program. Select Yes. Once the program has been deactivated and uninstalled, you can then install and activate it on another computer.
Currently, FliteStar does not take the Eurocontrol rules into account. If you need Eurocontrol valid routing, please talk with a Jeppesen Sales Representative about JetPlan and JetPlanner, which are getting a 90% Eurocontrol acceptance rate.
You can create a new model in FliteStar or edit an existing model. It's usually easier to choose a model similar to yours and edit it, as this provides a good template for entering your data.
Aviation ProductsJeppesen Mobile FliteDeck for iPad
Marine SoftwareWorkboat Navigator 1.3
Find the latest notices and alerts information which may affect your trip.
Get the latest free aviation weather maps.
Buy your pilot gear and parts for your aircraft.
We value customer feedback and invite you to complete a short survey about your customer experience.